 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PLA @df
is a tough, easy to use high grade PLA type of filament, ideal for 3d printing. Slightly modified, the filament retains the typical features of PLA, but makes it tougher and less brittle. Read more |
|
|
|
|
|
|
|
|
|
|
|
Below you do find the standard product qualities and colour range of Dutch Filaments. Together with you we define the packaging and labelling of your filaments. For questions you can contact us at info@dutchfilaments.com.
|
|
|
|
|
|
|
|
|
|
|
|
ABS @df
is an extra strong impact-resistant filament ideal for 3d printing of solid printed products. Due to the process stability and physical features of Acrylonitrile Butadiene Styrene it is a widely used thermoplastic polymer in industry. Read more |
|
|
|
|
|
|
|
|
|
|
|
PVA @df
filament is quickly soluble in water, bonds well to plastics and prints easy. Therefore it is an excellent supporting material for dual extruder 3d printing. Read more |
|
|
|
|
|
|
|
|
|
|
|
PA12 NYLON @df
is a high performance polyamide filament which natural colour is crystal clear. The polymer nylon PA12 is widely used in automotive, machinery and engineering industry since it combines mechanical strength, flexibility, transparency, UV resistance and superior chemical resistance. Read more |
|
|
|
|
|
FLEX 45 @df
is a very flexible rubber replacing filament for 3d printing. The combination of flexibility, mechanical strength, durability and good resistance to chemicals and extreme temperatures makes it a unique filament. Read more |
|
|
|
|
|
|
|
||
|
|
|
|
FLEX 65 @df
is a semi flexible filament for 3d printing. It is easy knotable as a filament, and bendable in most not too robust 3d shapes. Its mechanical strength, durability and good resistance to chemicals and extreme temperatures makes it a unique filament, which is easy to print. Read more |
|
|
|
|
|
HIPS @df
is an easy to print, High Impact Polystyrene filament with multifunctional properties. HIPS @df is an excellent support material in combination with ABS, because it dissolves in D'limonene @df and ABS remains unaffected. Read more |
|
|
|
|
|
|
|
|
|
|
|
M-ABS @df
is a transparent ABS filament, so strong, durable and impact resistant. Due to the low percentage of butadiene in M-ABS this filament smells much less unpleasant than ABS, and, moreover, also shows less warping. Read more |
|
|
|
|
|
GLASSBEND @df
is a crystal clear, strong, flexible and easy to print filament for 3D printing. These characteristics, together with the high degree of gloss, very low water absorption, practically no shrinkage or warping, very good interlayer adhesion and flame retardant properties make it a very special filament. Read more |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WOOD @df
is a modified PLA based type of filament, that smells and feels like wood. The filament is a bit brittle, but tough enough to be supplied in reels of 300 gram to 1kg. It prints easy, but we advise a slightly bigger nozzle to avoid blocking. Read more |
|
|
|
|
|
PET-G @df is a strong, high clarity, odor neutral and easy to print filament for 3D printing. These characteristics, together with the high impact strength, excellent flexibility and practically no shrinkage make PET-G an excellent material which combines the advantages of both PLA and ABS. Read more
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PC-ABS @df
is an incredibly strong filament with an even higher impact resistance than our regular ABS. This is a consequence of the addition of the proper amount of polycarbonate in this modification, which also creates a nearly perfect interlayer adhesion and a beautiful surface gloss. Read more
|
|
|
|
|
|
TPLA @df
is a tough, easy to use high grade colour changing PLA type of filament. The dark grey colour will change to natural above 29˚C, but much faster above 33˚C or higher. Other features are according our slightly modified PLA @df product, so tougher and less brittle as a regular PLA. Due to a low shrinkage factor PLA @df will not deform after cooling. Read more
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D'LIMONENE @df
is the perfect solvent for anyone wanting to print support heavy multi extrusion 3D models who does not want to spend hours having to manually remove , non dissolvable, support structures. Read more |
|
|
|
|
|
X-PELLETS @df
offer an easy, ready to use, solution to makers who want to extrude a wide variety of materials and colours with many different properties into their own supply of filament. The small particle size and homogeneity of the granules ensure a smooth and stable extrusion process for your filament. Read more |
|
|
|